[Answer ID: 15469]
What does the message on the LCD display indicate when the ERROR LED is turned on? (TS3000 series)
Refer to the following boxes which is listed the meaning of LED blinking and the resolution.
|
LCD Message |
Description |
Corrective Action |
|
BOOT FAIL |
Hard drive not found. |
Contact Buffalo technical support for assistance. |
|
SYSTEM Error E04 |
The firmware is corrupted. |
Contact Buffalo technical support for assistance. |
|
UPS E10 |
The TeraStation is running on the UPS battery due to a power outage. The system will now be shut down safely. |
Check that power is being supplied to the UPS, and if there are no problems, turn on the TeraStation. |
|
SYSTEM I10 |
A rise in the system temperature may have exceeded the allowable safety value. |
Move the TeraStation to a cool location. Do not place objects in the area around the TeraStation. |
|
SYSTEM Error E11 |
An error occurred in the fan speed. |
Check that no foreign objects or dust are clogging the fan. If any foreign objects or dust are found, use a pair of tweezers, air duster, or other tool to remove them. If the error is displayed again, contact Buffalo technical support for assistance. |
|
SYSTEM Error E12 |
A rise in the system temperature may have exceeded the allowable safety value. |
Do not place objects in the area around the TeraStation. Also, move the TeraStation to a cool location. |
|
RAID Arrayx E14 |
RAID array X cannot be mounted. |
Run the RAID array disk check in Settings. |
|
HDx Error E16 |
Unable to find hard drive X. |
Hard drive X may be disconnected or may have failed. After shutting down, reinstall the hard drive. |
|
HDx Error E22 |
Mounting of hard drive X failed. |
Format the hard drive. After formatting, if the error still appears after rebooting, replace the hard drive. If the error is displayed again, contact Buffalo technical support for assistance. |
|
FailOver E27 |
Unable to find the backup TeraStation. |
In the main TeraStation’s settings, navigate to Backup - Failover to reconfigure the backup TeraStation for failover. |
|
HDx Broken E30 |
An error occurred, so hard drive X was removed from the RAID array. |
Replace hard drive X. |
Details
