[Answer ID: 14574]
The TeraStation does not boot and the LCD shows the error "E04".
Created 07/30/2012 10:46 | Updated 08/28/2014 09:56
The TeraStation firmware is corrupted. Contact Buffalo technical support for assistance.
The following procedure might bring the product into a bootable condition.
As a repeated reboot may cause other failures,
a contact to your Buffalo Customer Service is recommended.
Procedure:
"After the error message "E04" is displayed,
Hold down the power button for 3 seconds, then the power is turned off and the TeraStation shows the error "E04".
Repeat these steps for several times.
The TeraStation may start with a message including "EM" on the LCD.
In the "EM" mode (Emergency Mode), the shared folders may be accessible after updating the firmware to the latest version.
Details
Products
OS / Hardware
Was this answer helpful?
Please tell us how we can make this answer more useful.